Fluorescent pigment is based on thermosetting resin, pigment with high tinting strength, strong resistance to fade, very fine particle size and strong solvent resistance, suitable for surface and intaglio printing ink, screen printing ink, textile dyeing and printing ink, crayon coloring, paint coating, air dissolve paint, paint and spray paint, paint, plastisol water and the water system, etc.

 

 

AnDeLun fluorescent pigment color and model are as follows: fluorescent, fluorescent glow bright red, pink, red, pink, fluorescent orange, fluorescent glow lemon yellow, orange, green, fluorescent glow purple, blue, purple.

 

 

Physical and chemical properties:

 

 

The proportion of

 

 

The average expected diameter

 

 

Softening point

 

 

Thermal stability

 

 

Oil absorption

 

 

Suggested usage

 

1.36 g/cm3

 

 

3 ~ 5 um

 

 

110-120 ℃

 

 

200 ℃

 

 

45% or less

 

 

0.5 to 2%

 

 

Scope of application: fluorescent pigment has the strongest fluorescent colour, bright and can be applied to the production safety facilities, toys, daily necessities, office accessories, the color of mud, cosmetic, packaging materials, shopping bags, and other attractive color of the products.

 

 

Additives: research has shown that contains free zinc, magnesium, calcium and iron ion plastic processing additive mixed with RX series fluorescent pigment contact, damage the fluorescent effect. So when using additive, should be thoroughly the effect on the stability of the test for the RX series fluorescent pigment.

 

Security and the heavy metal content: fluorescent pigment does not contain any harmful chemical substances to the human body. Completely suitable for toys or other daily necessities manufacturing. In terms of heavy metal content control, there are strict standards, high heavy metal content (PPM) :

 

Antimony (Sb) < 4.0 arsenic (As) < 4.0 barium cadmium (Cd) (Ba) < 0.5 < 0.25

 

Lead (Pb) < 1.0 mercury (Hg) < 0.05 selenium (Se) < 4.0 chromium (Cr) < 0.5

 

 

Storage and packing:

 

In dark, dry and normal temperature environment can be stored for a long time without affecting the quality and using effect.

 

Packing: 10 kg, 22.68 kg/piece. At the same time the root customer requirements packaging.

 

 

Spread and application:

 

Fluorescent pigment in most case, it can use the strong stirring (high-speed dispersion machine) scattered wetting solvent binders or liquid resin. Paint, processed with this method is suitable for spraying, brush, roller coating or coating. To be of higher fineness, should by adopting the method of wet milling processing, such as manufacturing printing ink, etc.

 

 

AnDeLun fluorescent pigment strong solvent resistance, suitable for nitrocellulose, polyvinyl chloride (PVC) - acetate, polyamide, acrylic resin, chlorinated rubber, and other resin produced all kinds of paint and ink, the resin has oxidation type of solvent, such as aromatic, alcohols, esters and ketones. Mixing these solvents must do the test in advance, and then use formally.

 

Note: the fluorescent pigment color migration is a problem, usually red paint. When plastic enough content in coating surface, color migration can obviously.

 

 

Storage and packing:

 

In dark, dry and normal temperature environment can be stored for a long time without affecting the quality and using effect.

 

Packing: 10 kg, 25 kg/pieces. At the same time the root customer requirements packaging.